Burger Motorsport Water Injection Kit for Mercedes-Benz C63, C63S AMG
Make tremendous amounts of power on pump gas!
Water/Methanol/Alcohol injection commonly referred to as WMI allow you to make tremendous amounts of power on pump gas. The effect is similar to running 100 octane race gas or E85 fuel all the time with the additional cooling benefits allowing for more power than you can make on race gas or E85 alone.
The key to a safe and effective WMI setup is tuning integration. The BMS methanol kit for Mercedes-Benz C63, C63S AMG integrates to the JB4 tuning system allowing for precise mapping based on boost, throttle position, engine speed, intake temperature, advance, gear, and other data elements available to the JB4 through its CANbus system. In addition a pump flow signal is fed back to the JB4 allowing for a safe and smooth progressive boost mapping. If the tank runs empty or flow drops for any reason the JB4 will safely back down performance to avoid detonation. Boost is held low until WMI is properly flowing to avoid tip in knock common with non-integrated WMI setups. In addition WMI can be activated or disabled right from the JB4 Mobile app , will automatically disengage during traction control or safety map situations, and WMI flow data can be displayed via your JB4 Mobile logging device.
The BMS WMI kit includes a high quality Aquatec WMI pump made to our specifications, high speed solenoid with leak-free compression fittings, a WMI filter, and all required wiring and mounting hardware.
The kit includes the BMS 2.2g clear integrated tank which fits under the hood in the passenger side cowl compartment with the pump mounting directly to the tank.
A JB4 system is required for tuning and safety. Can be used with hte factory flash map or any aftermarket flash map you choose. For those running aftermarket flash maps consult us on suggested WMI settings based on your specific tuning requirements.
What's inside our methanol injection nozzles?
Silicone WMI Nozzle Adapters for Mercedes-Benz C63, C63s AMG
These silicon plug and play adapters allow you to install BMS WMI nozzles without having to drill out your intercoolers. Saves a ton of install time and is fully reversible. We suggest dual BM5 nozzles for the Mercedes-Benz C63, C63s AMG. Nozzles not included. Made in the USA.
2 GALLON LOW PROFILE TANK
With our 2 gallon universal tank the WMI pump mounts directly to the tank for the ultimate easy to install tank. This tank is compact allowing for a wide range of mounting on any horizontal surface in the trunk. Works with all DDP 5800 pumps. Made in USA.
Tank dimensions: L 15.5" x W 8" x H 8.25"