If your car is equipped with factory exhaust flaps, with or without a center console button to open or close them, factory settings doNOTallow the flaps to fully open unless certain speed and/or RPM have been reached. For example, while cruising the exhaust flaps will never fully open!
THE EVM SOLUTION:
RENNtech’s plug & play EVM Exhaust Valve Module allows you to open the exhaust flaps of your car 100% at all times by pressingButton 1on the remote control. If you wish to go back to factory settings simnply pressButton 2. This gives you complete control over the exhaust sound and rumble of your car at any time regardless of speed, RPM or driving mode!
The RENNtech Exhaust Valve Module is made in Germany.
Advantages of RENNtech’s EVM:
Activation completely independent regardless of drive mode
Override your cars factory exhaust flap setting with the push of a button.
EVM does not engage with CAN-Bus
No interference with any control units.
Software updates do not interfere with the functionality of the EVM exhaust valve module.
Plug and Play with original plugs
No cutting wires, no damage to factory cables, fully reversible.
Included:
1 x Exhaust Valve Module
2 x Remote Controls (Button 1fully open,Button 2back to factory)
Wiring harness (model specific)
Installation manual
Fitment:
W213 - E 400 BiTurbo Sedan | MY2017-18
W213 - E 450 BiTurbo Sedan | MY2019
S213 - E 400 BiTurbo Wagon | MY2017-18
S213 - E 450 BiTurbo Wagon | MY2019
C238 - E 400 BiTurbo Coupe | MY2017+
C238 - E 450 BiTurbo Coupe | MY2017+
W213 - E 43 AMG Sedan | MY2017-18
S213 - E 43 AMG Wagon | MY2017-18
W213 - E 63 AMG 4-MATIC+ Sedan | MY2018+
W213 - E 63 S AMG 4-MATIC+ Sedan | MY2018+
S213 - E 63 AMG 4-MATIC+ Wagon | MY2018+
S213 - E 63 S AMG 4-MATIC+ Wagon | MY2018+
X290 - AMG GT 63 4-Door Coupe | MY2019+
X290 - AMG GT 63 S 4-Door Coupe | MY2019+
W222 - S 560 Sedan | MY2018+
W222 - S 63 AMG Sedan | MY2018+
C217 - S 560 Coupe | MY2018+
C217 - S 63 AMG Coupe | MY2018+
X253 - GLC 63 AMG SUV | MY2020+
C253 - GLC 63 AMG Coupe | MY2020+
Note:
No special tools or modifications required for installation
The RENNtech EVM is placed in the trunk, no hard wiring necessary - Plug'n'Play solution.
For extra convenience the EVM is programmed so once the flaps are fully opened they will stay that way even when the car is turned off and restarted later hence no need to press button 1 over and over every time you start the car. It will ONLY go back to factory setting by pressing button 2.